Finestra Tipo Elektromat usato in vendita (31.565)

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 600 t, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 200 t, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Sheet Metal Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and drawing applications. Thanks to the 8-guided, H-frame body structure, maximum rigidity is ensured during pressing; parallelism and perpendicularity tolerances remain stabile throughout the long stroke. The CHSP 600/200 model features a 600-ton main ram and a 200-ton lower blank holder (pot) capacity, providing precise control over the die and workpiece during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to ensure long-term, reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - TURK-AK-accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 600 Ton Capacity (Pot): 200 Ton Movable Table Size: 1200 × 1500 mm Gbodpfex N Uhzex Afbjg Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Pot Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK en ISO 15614-1/2017 (Welding operations supervised by certified “welding coordination engineers” according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Approach Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Pot Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø550 mm – Ck45 Pot Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5900 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2300 mm Fixed Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measurement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Materials: SIEMENS – SCHNEIDER Approx. Weight: 35 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, Funzionalità: perfettamente funzionante, numero macchina/veicolo: ZCVS250, larghezza totale: 1.100 mm, altezza totale: 950 mm, peso complessivo: 350 kg, tensione di ingresso: 380 V, durata della garanzia: 24 mesi, potenza nominale: 1,13 kW (1,54 CV), potenza: 1,13 kW (1,54 CV), larghezza del pezzo (max): 190 mm, lunghezza del pezzo (max): 190 mm, Equipaggiamento: Marcatura CE, ZCVS 250 MACCHINA VIBRANTE CIRCOLARE * Volume netto 250 litri (Capacità disponibile da 125 lt a 1250 lt su richiesta) * Rivestimento in poliuretano altamente resistente all’usura (90 Shore) * Pompa dosatrice inclusa * Valvola intercambiabile per lo scarico delle acque reflue * Diametro separatore su richiesta MOTORE: * Motore di azionamento trifase ad alte prestazioni * 1,1 kW 1500 rpm (OLI italiano) * Motore esente da manutenzione, non richiede lubrificazione QUADRO COMANDI: * Interruttore principale e pulsante di arresto di emergenza * Timer e contaore di funzionamento * Quadro di comando con interruttore per funzionamento motore destrorso/sinistrorso * Conformità agli standard di sicurezza CE VERNICIATURA: * Colore RAL 5003 & RAL 7001 Gbjdpfx Asrkmv Sofbsg * Verniciatura epossidica per garantire lunga durata al rivestimento.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 400 t, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 150 t, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming applications. Thanks to the 8-slided H-frame structure, maximum rigidity is provided during the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. Gjdpfx Afjx N Uhhjbobg The CHSP 400/150 model, featuring a 400-ton main ram and a 150-ton blank holder ram (cushion), is designed for deep drawing and forming applications requiring high tonnage. The frame is stress-relieved by vibration, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS certified welding applications, approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-slide H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 400 Tons - Capacity (Cushion): 150 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK accreditation; EN ISO 15614-1:2017 (Welding supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Fast Approach Speed (Moving Table): 150 mm/sec - Pressing Speed (Moving Table): 12 mm/sec - Return Speed (Moving Table): 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø450 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 5600 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approx. Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 250 t, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, forza di retrazione: 80 t, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Sliders General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and forming operations. The 8-guided H-frame structure provides maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are maintained consistently along the entire stroke. The CHSP 250/80 model, with a 250-ton main ram and an 80-ton blank holder (pot) capacity, is designed for medium-to-high tonnage deep drawing and forming applications. The frame construction is stress-relieved using vibration methods, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body type - Frame structure stress relieved by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touch panel interface - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 - Type: Steel construction, 8-guided H-frame press body - Frame Material: St52 – ERDEMİR sourced - Slide Bearings: Bronze Zr14 - Capacity (Ram): 250 Tons - Capacity (Pot): 80 Tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Pot): 300 mm - Min. Die Space: 100 mm - Max. Die Space: 900 mm - Stress Relief: Vibratory method - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Rate: 150 mm/s - Moving Table Drawing Rate: 12 mm/s - Moving Table Return Rate: 170 mm/s - Pot Table Forward Speed: 30 mm/s - Main Cylinder Internal Diameter: Ø360 mm – Ck45 - Pot Cylinder Internal Diameter: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER Godpfxjx N Uaqo Afbsbg - Linear Distance Gauge: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Screen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 200 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, forza di retrazione: 70 t, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Sliders General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle, ensuring controlled material flow for sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the stroke. The CHSP 200/70 model, with a 200-ton main ram and a 70-ton cushion (blankholder) capacity, is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration method to ensure long life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch screen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - Monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgears 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 200 Ton Capacity (Cushion): 70 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Open Height: 100 mm Max. Open Height: 900 mm Stress-Relieving: Vibration method Welding Application: Certified by TÜRK-AK-accredited WPQR and WPS (EN ISO 15614-1/2017, audits by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Gbodpfx Afex N T U Tobsg Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Cushion Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-Fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgears: SIEMENS – SCHNEIDER Approximate Weight: 13.5 Ton Production Note This machine is manufactured in Türkiye by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, forza di retrazione: 50 t, corsa: 600 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and flanging applications. The 8-guided H-frame structure provides maximum rigidity during the pressing cycle; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model is engineered for precise and repeatable deep drawing applications, featuring a main ram capacity of 150 tons and a blank holder (pot) capacity of 50 tons. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Capacity (Pot): 50 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Pot): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (Welding applications are supervised by certified “welding coordination engineers” in accordance with EN ISO 14731) Max. Operating Pressure: 250 Bar Gbodpfx Afex N T U Hobsg Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Pot Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø280 mm – Ck45 Pot Cylinder Inner Diameter: Ø160 mm – Ck45 Auxiliary Accelerating Cylinders: 2 units Approximate Height: 3650 mm Approximate Width: 2950 mm Approximate Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Manufacturing Note This machine is produced by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 100 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, forza di retrazione: 40 t, corsa: 600 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame construction provides maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances along the stroke. The CHSP 100/40 model, featuring a 100-ton main ram and a 40-ton cushion (pot) capacity, is engineered for precise deep drawing and spinning operations. The frame structure is stress-relieved by vibration methods to guarantee long-term durability and operational reliability. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welds accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen control panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter clogging alert - Real-time display of hydraulic oil temperature and system status on the panel - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 100 Tons - Capacity (Cushion): 40 Tons - Moving Table Size: 1000 × 1200 mm Gjdpfxox N T Uys Afbobg - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 600 mm - Stroke (Cushion): 200 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 700 mm - Weld Stress Relieving: Vibration stress relief - Welding Application: WPQR and WPS approved by TÜRK-AK accreditation EN ISO 15614-1:2017 (Supervised by certified welding coordination engineers as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Fast Approach Speed: 150 mm/s - Moving Table Drawing Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Lower Table Height from Floor: 1250 mm - Pre-Fill Valve: NG 100 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Ruler: NOVATECHNIK or TURCK - PLC Control: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 2.000 t, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.500 mm, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for applications demanding extremely high tonnage, such as heavy-duty forming, deep drawing, spinning, and die operations. The 8-guide H-frame structure provides maximum stiffness during pressing and maintains parallelism and perpendicularity tolerances throughout the stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and robust motor configuration, offers a reliable and durable solution for the automotive, defense, heavy industry, and high-tonnage production lines. The frame is stress-relieved via vibration, ensuring stable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 guide bushings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 2000 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 2000 Ton Moving Table Dimensions: 1500 x 2500 mm Fixed Table Dimensions: 1500 x 2500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified, TÜRK-AK accredited – EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6300 mm Approx. Press Width: 3850 mm Godpfx Asx N T Srjfbjbg Approx. Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 95 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.500 t, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.400 mm, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-guide H-frame structure provides maximum rigidity and stability during pressing, helping to maintain parallelism and perpendicularity tolerances. The CHP 1500 model, with its large table dimensions, powerful hydraulic system, and high stroke capacity, offers a reliable solution for the automotive, defense, heavy metal forming, and industrial production lines. The frame structure is stress-relieved by vibration to ensure long life and stable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8 guides - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production according to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical switchgear components 📐 Technical Specifications – CHP 1500 - Type: Steel construction, H-frame press body with 8 guides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 1,500 Ton - Movable Table Dimensions: 1,500 × 2,400 mm - Fixed Table Dimensions: 1,500 × 2,400 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m Gjdpfx Afox N T R Uebjbg - Stroke (Ram): 1,000 mm - Min. Daylight: 200 mm - Max. Daylight: 1,200 mm - Stress Relief: Vibration method - Welding Certification: Welding application certified to EN ISO 15614-1/2017, WPQR and WPS, accredited by TÜRK-AK - Max. Working Pressure: 250 Bar - Total Motor Power: 90 kW – IE3 - Main Pump: 101 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø620 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Height of Press: 6,250 mm - Approximate Width of Press: 3,750 mm - Approximate Depth of Press: 2,500 mm - Lower Table Height from Floor: 1,500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 70 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.200 t, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.000 mm, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. With an 8-guideway H-frame structure, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame is stress-relieved by vibration, ensuring even distribution of loads during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment Steel construction, 8-guideway H-frame press body Vibration stress-relieved frame structure Bronze Zr14 slideway bearings WPQR and WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Design and production according to CE standards PLC-controlled hydraulic system Touchscreen panel (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Safety systems for operator protection SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Clearance: 100 mm Max. Clearance: 1100 mm Stress Relief: Vibration stress relief Welding Application: EN ISO 15614-1/2017 certified, WPQR & WPS approved by TÜRK-AK Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of the Press: 6100 mm Approx. Width of the Press: 3550 mm Approx. Depth of the Press: 2400 mm Distance from Floor to Bottom Table: 1450 mm Pre-fill Valve: NG 200 Godpex N T Ruefx Afbobg Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 1.000 t, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.000 mm, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are engineered for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guide H-frame structure ensures maximum rigidity, precision, and long service life by evenly distributing the immense forces generated during pressing. The CHP 1000 model has been developed to provide reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are designed considering heavy industrial conditions. The frame and main supporting structures are stress relieved through vibration methods. Smooth load distribution and high accuracy along the slide travel are achieved by bronze Zr14 slide bearings. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved body via vibration method - Bronze Zr14 slide bearings - Welding applications certified by WPQR & WPS, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-slide H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration method - Welding Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Descend Speed: 150 mm/s - Movable Table Pressing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6000 mm - Approx. Press Width: 3450 mm - Approx. Press Depth: 2400 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approx. Weight: 55 Tons Production Note Gsdpfex N T Rbox Afbebg This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 800 t, larghezza tavola: 1.500 mm, lunghezza del tavolo: 2.000 mm, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8 Slideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-slideway H-frame structure ensures even distribution of the high forces generated during pressing, providing maximum rigidity and extended service life. The CHP 800 model has been developed for high-capacity production lines, aiming for dependable and stable performance. CHP Series – Structural Features The CHP series presses are engineered taking into account heavy industry conditions. The frame and main load-bearing components are stress-relieved through vibration. The bronze Zr14 slideway bearings ensure uniform load distribution and precise operation throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slideways - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 800 - Type: Steel construction, H-frame with 8 slideways - Frame Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 800 Tons - Moving Table Size: 1500 × 2000 mm - Fixed Table Size: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Verticality Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Via vibration - Welding Application: WPQR and WPS certified by TÜRK-AK, welding application certificate per EN ISO 15614-1/2017 (supervised by certified welding coordination engineers per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Descent Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units Gbodpfx Aex N T Nkofbjg - Approximate Press Height: 6000 mm - Approximate Press Width: 3350 mm - Approximate Press Depth: 2700 mm - Bottom Table Height from Floor: 1450 mm - Pre-Fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 45 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 600 t, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for metal sheet forming, straightening, assembly, and heavy-duty pressing applications. The 8-guide H-frame design ensures balanced distribution of high forces generated during pressing, providing long-lasting and stable operation. The CHP 600 model is engineered for reliable performance in production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are designed with heavy-duty conditions in mind. The frame and load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bearings offer uniform load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved body structure by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 600 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 600 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: By vibration Welding Application: TÜRK-AK accredited WPQR & WPS certified according to EN ISO 15614-1/2017 (supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø550 mm – Ck45 Pot Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Machine Height: 5900 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 28 Tons Gbsdjx N T Iajpfx Afbeg Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 500 t, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, corsa: 1.000 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures a balanced distribution of high loads during pressing, providing stable and repeatable operation. The CHP 500 model is engineered for heavy-duty production processes that require high tonnage, with a focus on long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed with heavy-duty operating conditions in mind. The frame and support components are stress-relieved by vibration. Bronze Zr14 slide bushings guarantee even load distribution and sustained precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guided slides - Stress-relieved frame and supporting components (via vibration) - Bronze Zr14 slide bushings - WPQR & WPS certified welding procedures approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacture conforming to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination alert - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 - Type: Steel construction, H-frame press type with 8 guided slides - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 500 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Clearance: 100 mm - Max. Clearance: 1100 mm - Weld Stress Relief: Vibration method - Welding Application: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017), monitored by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 5800 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Lower Table Height from Floor: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Measuring Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 23 Tons Gbsdpfsx N T H Asx Afbog Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 400 t, larghezza tavola: 1.200 mm, lunghezza del tavolo: 1.500 mm, corsa: 800 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 400 H-Type Single Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are industrial press solutions featuring high rigidity, developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame structure, high loads generated during pressing are distributed evenly, delivering stable and repeatable operation. The CHP 400 model is designed for reliable and long-lasting performance in heavy-duty applications requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered with consideration for heavy-duty operating conditions. Frame and supporting elements are stress-relieved by vibration. Bronze Zr14 slide bearings deliver smooth force distribution during ram movement and help maintain long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibratory stress-relieved frame and support components - Bronze Zr14 slide bearings - Welding applications with TÜRK-AK accredited WPQR & WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guide H-frame structure Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Ton Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Die Opening: 100 mm Max. Die Opening: 900 mm Weld Stress Relief: Vibratory stress-relieving Welding Application: Welding procedures approved by TÜRK-AK accredited WPQR and WPS certificate to EN ISO 15614-1/2017, supervised by certified welding coordination engineers per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Gedpfx Afox N T Hpobsbg Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touch Screen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 300 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, corsa: 600 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity, industrial solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. With its 8-guideway H-frame structure, the high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 300 model is designed for medium to high tonnage production processes, delivering a long service life and reliable performance. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operation. The frame and supporting components are stress-relieved using vibration. Bronze Zr14 slide bearings ensure uniform load distribution during ram movement, contributing to long-term precision. ⚙️ Standard Equipment Steel-constructed, 8-guideway H-type press frame Stress-relieved frame and supporting parts by vibration Bronze Zr14 slide bearings WPQR & WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Machine structure designed and manufactured in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Two-hand control system Light curtain (operator safety as standard) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guideway H-frame type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Tons Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration method Welding Application: WPQR and WPS certified by TÜRK-AK accreditation with EN ISO 15614-1/2017 welding procedure qualification certificate (monitored by certified welding coordination engineers as per EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 4400 mm Approx. Width of Press: 3250 mm Approx. Depth of Press: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Godpfx Afox N T E Ejbjbg Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 250 t, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, corsa: 600 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 250 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die stamping applications. Thanks to their 8-guided H-frame construction, loads generated during pressing are evenly distributed, providing stable and repeatable operation. The CHP 250 model is designed for production processes requiring medium to high tonnage, offering long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are engineered for demanding heavy-duty operations. The frame and bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings ensure even load distribution during ram movement, contributing to prolonged high-precision operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-type press frame • Vibration stress-relieved frame and carrier parts • Bronze Zr14 slide bearings • WPQR & WPS welding applications approved and accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Gbodpfsx N T Eljx Afbjg • Machine design and production compliant with CE standards • PLC-controlled hydraulic system • Touchscreen control panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • Hydraulic unit oil temperature and system status monitoring via display • Cooling system • Off-line filtration • Dual-hand control system • Light curtain (standard operator safety) • SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 250 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Press Capacity (Ram): 250 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 microns/m Squareness Tolerance: 60 microns/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved welding application certified to EN ISO 15614-1/2017, accredited by TÜRK-AK (supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Rapid Descent Speed of Moving Table: 150 mm/s Pressing Speed of Moving Table: 12 mm/s Return Speed of Moving Table: 170 mm/s Main Cylinder Bore Diameter: Ø360 mm – Ck45 Auxiliary Boost Cylinders: 2 pcs Approx. Height: 4200 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-Fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 150 t, larghezza tavola: 800 mm, lunghezza del tavolo: 1.000 mm, corsa: 500 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 150 H Frame Single Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-frame single acting hydraulic presses are industrial machines with rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame body design, it provides stable, balanced, and repeatable operation during pressing. The CHP 150 model is developed for medium-tonnage applications with a focus on reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operations in mind. The frame and carrier parts are stress-relieved by vibration. Bronze Zr14 slide bearings ensure smooth load transfer and long-term stable operation. Gjdpfxox N T Dzs Afbebg ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 slide bearings - Welding applications with WPQR & WPS approvals accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Opening: 100 mm Max. Opening: 600 mm Stress Relief: Vibration stress relief Welding Application: Welding applications certified to EN ISO 15614-1/2017, accredited by TÜRK-AK (supervised by welding coordination engineers certified to EN ISO 14731) Max Operating Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approximate Press Height: 3650 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Height of Lower Table from Floor: 1250 mm Main Filling Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, forza di pressatura: 100 t, larghezza tavola: 800 mm, lunghezza del tavolo: 1.000 mm, corsa: 500 mm, pressione di esercizio: 250 barra, Equipaggiamento: barriera di sicurezza a luce, documentazione / manuale, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8 Guide Slideways General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-slide H-frame structure, it ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operating conditions. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 material used for the slide bearings offers long service life and stable operation. Key Advantages - 8-slide H-frame construction - Vibration-stress relieved steel body - Welding applications in compliance with ISO standards - PLC controlled operation with touchscreen interface - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration-stress-relieved frame and carrier parts - Bronze Zr14 slide bearings - WPQR & WPS approved welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Tons Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR & WPS approved by TÜRK-AK, welding process certificate to EN ISO 15614-1:2017 (inspection by welding coordination engineers certified to EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Gbsdpfx Asx N Tx Sofbog Approx. Press Height: 3,400 mm Approx. Press Width: 2,950 mm Approx. Press Depth: 2,000 mm Bottom Table Height from Floor: 1,250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 6.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condizione: nuovo, Anno di produzione: 2025, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, forza di pressatura: 250 t, durata della garanzia: 24 mesi, corsa: 200 mm, Equipaggiamento: barriera di sicurezza a luce, La pressa eccentrica è un tipo di pressa meccanica che utilizza una forza generata tramite un meccanismo eccentrico per operazioni di formatura a freddo quali tranciatura, taglio e stampaggio. Le presse eccentriche di tipo H (straight-side), grazie alla loro struttura estremamente rigida, garantiscono un’elevata stabilità e sicurezza di processo. La CRONOSSTECH CEHP-TB-250 – Pressa eccentrica tipo H da 250 tonnellate, è progettata per offrire prestazioni stabili ad alte produzioni, con particolare attenzione alla protezione dello stampo e alla sicurezza dell’operatore. Il telaio monoblocco, il sistema di scorrimento a 8 guide, la valvola idraulica di sovraccarico e la lubrificazione automatica forniscono affidabilità in condizioni di produzione continua. Gbodpfxox N Sc Aj Afbjg Vantaggi principali: - Piano di lavoro da 1200×1000 mm per operazioni stabili anche con stampi di grandi dimensioni - Protezione di stampi/attrezzature tramite valvola idraulica di sovraccarico - Gestione controllata e user-friendly tramite PLC con touch screen - Massima sicurezza dell’operatore con barriera fotoelettrica - Minima necessità di manutenzione grazie alla lubrificazione automatica Campi di applicazione: - Tranciatura / taglio / stampaggio - Produzioni in serie con sistemi di alimentazione automatica - Processi impegnativi con stampi pesanti e alte tonnellate ✅ CARATTERISTICHE STANDARD • Struttura in acciaio saldato • Frizione-freno pneumatico • Piastra aggiuntiva con cave a T • Slitta su 8 guide • Corsa regolabile con biella singola • Bilanciamento pistone sulla slitta • Sistema di lubrificazione automatica fine • Controllo PLC • Quadro di comando tipo "a pianoforte" • Display LCD touch • Inversione del senso di marcia del motore • Protezione idraulica contro i sovraccarichi • Regolazione motorizzata della slitta • Barriera fotoelettrica di sicurezza • Gruppo ingranaggi in vasca chiusa d’olio • Valvola di sicurezza a doppia bobina • Conformità CE ✅ CARATTERISTICHE OPZIONALI • Sistemi di alimentazione per pressa • Sistemi di evacuazione sfridi • Riparo di sicurezza scorrevole anteriore al piano • Stampi secondo specifica cliente ✅ SPECIFICHE TECNICHE (CEHP-TB-250) Capacità: 250 tonnellate Distanza tavola-slitta: 500 mm Luce fra le colonne: 1230 mm Regolazione slitta: 120 mm Larghezza pressa: 2900 mm Profondità pressa: 2550 mm Altezza pressa: 4600 mm Dimensione tavola: 1200×1000 mm Dimensione piano slitta: 1200×1000 mm Corsa (fissa): 200 mm Potenza motore: 37 kW Peso: 31.000 kg ✅ NOTA DI PRODUZIONE/APPROVVIGIONAMENTO Questa macchina è prodotta da CRONOSSTECH in Turchia. Vendita, installazione e post-vendita sono gestiti direttamente da CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, larghezza tavola: 1.000 mm, lunghezza del tavolo: 1.200 mm, forza di pressatura: 200 t, durata della garanzia: 24 mesi, corsa: 200 mm, La pressa eccentrica è un tipo di pressa meccanica azionata tramite la forza generata da un meccanismo eccentrico, utilizzata in operazioni di formatura a freddo come punzonatura, taglio e stampaggio. Le presse eccentriche di tipo H (straight-side) garantiscono elevata stabilità e sicurezza di processo grazie alla loro struttura del telaio rigida. La CRONOSSTECH CEHP-TB-200 – Pressa Eccentrica Tipo H da 200 Ton è progettata per garantire funzionamento stabile in produzioni ad alto volume, protezione degli stampi e sicurezza dell’operatore. Grazie a telaio monoblocco, sistema di slitta a 8 guide, protezione idraulica contro il sovraccarico e lubrificazione automatica, offre prestazioni affidabili per la produzione continua. Vantaggi principali: - Piano di lavoro 1200×1000 mm per operazioni stabili anche con stampi di grandi dimensioni - Protezione stampo/attrezzature tramite valvola idraulica di sicurezza contro il sovraccarico - Gestione controllata e user-friendly tramite PLC con touchscreen - Barriera fotoelettrica di sicurezza per la massima protezione operatore - Sistema di lubrificazione automatica per ridotta necessità di manutenzione Applicazioni principali: - Punzonatura / Taglio / Formatura a stampo - Produzione in serie con linee di alimentazione automatizzate - Lavorazioni con stampi pesanti e processi di produzione ad alta tonnellaggio ✅ CARATTERISTICHE STANDARD • Struttura in acciaio saldato • Frizione-freno pneumatica • Piastra aggiuntiva con cave a T • Slitta a 8 guide • Corsa regolabile sull’asta eccentrica • Pistone contrappeso slitta • Sistema di lubrificazione automatica sottile Godpsx N Sccjfx Afbebg • Sistema di controllo PLC • Quadro elettrico tipo pianoforte • Schermo LCD touchscreen • Inversione motore • Valvola idraulica di sicurezza contro sovraccarico • Sistema di regolazione slitta motorizzato • Barriera fotoelettrica di sicurezza • Gruppo ingranaggi in camera d’olio chiusa • Valvola di sicurezza a doppia bobina • Conformità agli standard CE ✅ CARATTERISTICHE OPZIONALI • Sistemi di alimentazione per pressa • Sistemi di scarico per materiali di scarto • Porta di sicurezza scorrevole anteriore al banco • Stampi realizzati su richiesta ✅ DATI TECNICI (CEHP-TB-200) Capacità: 200 ton Distanza tavola-slitta: 500 mm Distanza tra le colonne: 1230 mm Regolazione slitta: 120 mm Larghezza pressa: 2900 mm Profondità pressa: 2550 mm Altezza pressa: 4600 mm Dimensione piano lavoro: 1200×1000 mm Dimensione fronte slitta: 1200×1000 mm Corsa (fissa): 200 mm Potenza motore: 30 kW Peso: 24.000 kg ✅ NOTA PRODUZIONE/FORNITURA Questa macchina è prodotta da CRONOSSTECH in Turchia. Vendita, messa in servizio e assistenza post-vendita sono gestite direttamente da CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, larghezza tavola: 750 mm, lunghezza del tavolo: 1.100 mm, forza di pressatura: 125 t, durata della garanzia: 24 mesi, corsa: 200 mm, Equipaggiamento: barriera di sicurezza a luce, La pressa eccentrica è un tipo di pressa meccanica che opera con una forza generata da un meccanismo eccentrico, utilizzata in operazioni di formatura a freddo come punzonatura, taglio e stampaggio. Le presse eccentriche a tipo H (straight-side), grazie alla loro struttura altamente rigida, garantiscono elevata stabilità e sicurezza di processo. La CRONOSSTECH CEHP-TB-125 – Pressa eccentrica tipo H da 125 tonnellate è progettata per un funzionamento stabile nelle produzioni ad alto volume, con particolare attenzione alla protezione dello stampo e alla sicurezza dell’operatore. Grazie alla struttura monoblocco, al sistema slitta con 8 guide, alla protezione idraulica da sovraccarico e al sistema di lubrificazione automatica, offre prestazioni affidabili anche per la produzione continua. Gedex N R U Rspfx Afbjbg Vantaggi principali - Piano di lavoro 1100×750 mm per una produzione stabile e ripetibile - Protezione stampo/attrezzatura con dispositivo idraulico contro i sovraccarichi - Controllo preciso e interfaccia user-friendly tramite PLC e touch-screen - Sicurezza elevata per l’operatore grazie alla barriera fotoelettrica - Minima necessità di manutenzione grazie al sistema di lubrificazione automatico Campi d’applicazione - Punzonatura / Taglio / Formatura a stampo - Produzione in serie con linee di alimentazione automatica - Processi produttivi ad alto volume ✅ DOTAZIONE STANDARD • Struttura in acciaio saldato • Frizione/freno pneumatico • Piano aggiuntivo con scanalature a T • Slitta guidata su 8 punti • Corsa regolabile con biella singola • Pistone di bilanciamento sulla slitta • Sistema di lubrificazione automatica a olio sottile • Sistema di controllo PLC • Quadro di controllo tipo 'piano' • Schermo LCD touch • Inversione motore • Protezione idraulica sovraccarico • Regolazione motorizzata della slitta • Barriera fotoelettrica di sicurezza • Gruppo ingranaggi in serbatoio olio chiuso • Valvola di sicurezza a doppia bobina • Conformità agli standard CE ✅ DOTAZIONE OPZIONALE • Sistemi di alimentazione per presse • Sistemi di scarico scarti • Protezione di sicurezza scorrevole fronte tavola • Stampi con caratteristiche su richiesta ✅ DATI TECNICI (CEHP-TB-125) Capacità: 125 ton Distanza piano–slitta: 500 mm Luce tra le spalle: 1130 mm Regolazione slitta: 100 mm Larghezza pressa: 2700 mm Profondità pressa: 2200 mm Altezza pressa: 4500 mm Dimensione piano: 1100×750 mm Superficie slitta: 1100×750 mm Corsa slitta (fissa): 200 mm Potenza motore: 18,5 kW Peso: 14.000 kg ✅ NOTA DI PRODUZIONE / FORNITURA Questa macchina è prodotta da CRONOSSTECH in Turchia. Vendita, avviamento e assistenza post-vendita sono gestiti direttamente da CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, larghezza tavola: 1.200 mm, lunghezza del tavolo: 2.200 mm, forza di pressatura: 600 t, durata della garanzia: 24 mesi, corsa: 200 mm, Equipaggiamento: barriera di sicurezza a luce, Una pressa eccentrica è un tipo di pressa meccanica che funziona tramite la forza generata da un meccanismo eccentrico per eseguire operazioni di stampaggio a freddo come foratura, taglio e formatura tramite stampo. Le presse eccentriche di tipo H (straight-side) offrono elevata stabilità e sicurezza del processo grazie alla loro struttura del telaio rigida, risultando ideali per applicazioni con grandi tavole e stampi pesanti. La CRONOSSTECH CEHP 600 – Pressa Eccentrica H-Type da 600 Ton è progettata per una produzione ad alto volume, con particolare attenzione alla stabilità, protezione dello stampo e sicurezza dell’operatore. Grazie al corpo monoblocco, al sistema di slitta a 8 guide, alla protezione idraulica contro i sovraccarichi e al sistema di lubrificazione automatica, garantisce prestazioni affidabili anche in condizioni di produzione continua. Vantaggi principali: • Tavola 2200×1200 mm per operazioni stabili con stampi di grande dimensione • Protezione stampo/attrezzatura grazie alla valvola idraulica contro i sovraccarichi • Guida precisa tramite slitta a 8 guide + pistone bilanciatore • Controllo intuitivo e sicuro con PLC e touchscreen • Massima sicurezza per l’operatore tramite barriera fotoelettrica Campi di utilizzo: • Operazioni di foratura, taglio e stampaggio che richiedono tavole di grandi dimensioni • Produzione in serie con linee di alimentazione automatica • Processi produttivi con stampi pesanti e ad alto tonnellaggio CARATTERISTICHE STANDARD • Struttura in acciaio saldato • Frizione e freno pneumatici • Piastra supplementare con scanalature a T • Slitta a 8 guide • Corsa regolabile su biella singola • Pistone bilanciatore sulla slitta • Sistema di lubrificazione automatica a bagno d’olio • Sistema di controllo PLC • Quadro elettrico tipo "pianoforte" • Touchscreen LCD • Inversione motore • Valvola di sicurezza idraulica contro i sovraccarichi • Regolazione elettrica della slitta Gbsdpfx Asx N R A Ujfbsg • Barriera fotoelettrica di sicurezza • Gruppo ingranaggi in vasca chiusa a olio • Valvola di sicurezza a doppia bobina • Conformità alle norme CE CARATTERISTICHE OPZIONALI • Sistemi di alimentazione automatica • Sistemi di evacuazione scarti • Paratia di sicurezza scorrevole anteriore • Stampi su richiesta DATI TECNICI (CEHP 600) Capacità: 600 tonnellate Distanza tavola-slitta: 500 mm Larghezza tra montanti: 2350 mm Regolazione slitta: 120 mm Larghezza pressa: 3100 mm Profondità pressa: 3500 mm Altezza pressa: 5200 mm Dimensione tavola: 2200×1200 mm Dimensione slitta: 2200×1200 mm Corsa (fissa): 200 mm Potenza motore: 90 kW Peso: 77.000 kg AVVISO SU PRODUZIONE/FORNITURA Questa macchina è prodotta da CRONOSSTECH in Turchia. Tutti i processi di vendita, messa in servizio e post-vendita sono gestiti direttamente da CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, larghezza tavola: 1.200 mm, lunghezza del tavolo: 2.200 mm, forza di pressatura: 500 t, durata della garanzia: 24 mesi, corsa: 200 mm, Equipaggiamento: barriera di sicurezza a luce, La pressa eccentrica è un tipo di pressa meccanica utilizzata per operazioni di formatura a freddo come punzonatura, taglio e stampaggio, azionata tramite la forza generata da un meccanismo eccentrico. Le presse eccentriche di tipo H (straight-side) offrono alta stabilità e sicurezza di processo grazie alla loro struttura del telaio rigida, particolarmente adatte per applicazioni con tavola ampia e stampi pesanti. La CRONOSSTECH CEHP 500 – Pressa Eccentrica H-Type da 500 tonnellate, è progettata per garantire funzionamento stabile nelle produzioni ad alto volume, con particolare attenzione alla protezione dello stampo e alla sicurezza dell’operatore. Grazie al corpo monoblocco, il sistema a 8 guide della slitta, protezione idraulica contro il sovraccarico e sistema di lubrificazione automatica, garantisce prestazioni affidabili per la produzione continuativa. Vantaggi principali • Tavola di 2200×1200 mm per lavorazioni stabili con stampi di grandi dimensioni • Protezione idraulica contro il sovraccarico per la salvaguardia di stampi e attrezzature • Slitta guidata su 8 cuscinetti + pistone contrappeso per un movimento preciso • Controllo PLC con touchscreen per un’operatività semplice e sicura • Barriera fotoelettrica per la massima sicurezza dell’operatore Aree di utilizzo • Applicazioni di punzonatura/taglio/formatura che richiedono tavole di grandi dimensioni • Produzione in serie tramite linee di alimentazione automatiche • Processi con stampi pesanti e produzioni ad alto tonnellaggio ✅ CARATTERISTICHE STANDARD • Telaio in acciaio saldato • Frizione e freno pneumatici • Piastra supplementare con scanalature a T • Slitta guidata su 8 cuscinetti • Corse regolabili su biella singola • Pistone contrappeso sulla slitta • Sistema di lubrificazione a olio automatico • Controllo PLC • Quadro di comando a pianoforte • Schermo LCD touchscreen • Inversione motore • Protezione idraulica contro sovraccarico • Regolazione motorizzata della slitta • Barriera fotoelettrica di sicurezza • Gruppo ingranaggi in vasca chiusa d'olio • Valvola di sicurezza a doppia bobina Gbjdpsx N R Ahsfx Afbsg • Conformità alle normative CE ✅ OPZIONI DISPONIBILI • Sistemi di alimentazione per la pressa • Sistemi di scarico materiale di scarto • Paratia di sicurezza scorrevole frontale • Stampi personalizzati su richiesta ✅ DATI TECNICI (CEHP 500) • Capacità: 500 tonnellate • Distanza tavola-slitta: 500 mm • Distanza tra le spalle: 2330 mm • Regolazione slitta: 120 mm • Larghezza pressa: 2900 mm • Profondità pressa: 3350 mm • Altezza pressa: 5000 mm • Dimensioni tavola: 2200×1200 mm • Dimensioni slitta: 2200×1200 mm • Corsa (fissa): 200 mm • Potenza motore: 75 kW • Peso: 68.000 kg ✅ NOTA DI PRODUZIONE/FORNITURA Questa macchina è prodotta da CRONOSSTECH in Turchia. Vendita, messa in funzione e assistenza post-vendita sono gestite direttamente da CRONOSSTECH.

Condizione: nuovo, Anno di produzione: 2025, larghezza tavola: 1.100 mm, lunghezza del tavolo: 2.000 mm, forza di pressatura: 250 t, durata della garanzia: 24 mesi, corsa: 200 mm, Equipaggiamento: barriera di sicurezza a luce, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism. It is primarily used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety in applications involving large tables and heavy dies, thanks to their rigid frame structure. The CRONOSSTECH CEHP 250 – H Type Eccentric Press, with its 250-ton capacity, is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. Its monobloc frame, eight-point guided slide system, hydraulic overload safety device, and automatic lubrication infrastructure ensure reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies thanks to a 2000×1100 mm table - Die/equipment protection via hydraulic overload safety - Precise guidance with eight-point slide + balancer piston Gjdsx N Rwrjpfx Afbebg - Controlled and user-friendly operation via PLC + touchscreen panel - High operator safety through light curtain protection Application Areas: - Punching/cutting/forming operations requiring a large table - Series production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel weldment frame • Pneumatic clutch and brake • T-slotted auxiliary base plate • Eight-point guided slide • Adjustable stroke on single connecting rod • Balancer piston on slide • Fully automatic micro-lubrication system • PLC control unit • Piano-type control panel • Touchscreen LCD display • Reverse motor function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain safety system • Enclosed gear set within oil reservoir • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL EQUIPMENT • Press feeding systems • Scrap evacuation systems • Sliding safety cover in front of the table • Dies manufactured to specification ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 tons Table–Ram Distance: 500 mm Housing Width: 2,130 mm Ram Adjustment: 120 mm Press Width: 2,900 mm Press Depth: 2,650 mm Press Height: 4,600 mm Table Dimension: 2,000×1,100 mm Ram Face Size: 2,000×1,100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are handled directly by CRONOSSTECH.