Macchina per la bordatura dei bordi

IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20

Single-sided edge banding machine for narrow edges IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with MFA servo corner copying unit
Year of manufacture: 2009
Technical condition: very good

- Solid machine body with mounting for individual processing units.
- Feed drive with electronically adjustable speed from 6–30 m/min (the speed of processing units is not synchronized with the entire feed speed range).
- Feed chain guided in sliding guides with plastic pads and an 80 mm wide rubber lining.
- Automatic feed chain lubrication controlled by the machine program.
- Top pressure made from a double Poly-V belt, 70 mm wide, running on ball-bearing guide rollers; pressure electronically adjustable.
- Machine safety constructed according to CE certification.
- Sound-insulating and safety enclosures.
- Edging unit with drive mounted in a tightly sealed oil bath and glue pot (1 main powered pressure roller + 5 auxiliary rollers); pneumatic Quick-Lock glue pot mounting system for fast changeover.
- Touch-screen display.
- End trimming saw unit for trimming edge overhang at the front and rear corner of the panel, with the following features: pneumatic saw angle adjustment 0–25°, straight cuts and corner beveling,
automatic saw setting for beveling on two different edge thicknesses (e.g. 0.4 and 1.2 mm) and overhang adjustment for corner copying.
- All processing units equipped with chip extraction ports.
- Novimat Contour edge banders provide very high-quality processing, thanks to a powerful corner copying unit and a small element gap (~300 mm).

Basic technical data:
- Edge material from roll thickness: 0.3–3 mm
- Paper, PVC, and ABS edging: 0.3–3.0 mm
- Veneer: 0.5–3.0 mm
- Solid wood strips: 0.8–20 mm
- Edge height: 14–65 mm
- Maximum edge overhang from the top:
Psdpfx Aow R S Slsdisgw
• up to 8 mm edge thickness – 5 mm
• above 8 mm – 2 mm

Workpiece dimensions:
- Minimum element length (feed direction): 150 mm
- Minimum element width (for workpieces up to 25 mm thick): 65 mm
- Minimum element thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper)
- Maximum element thickness:
• without corner copying: max. 60 mm
• with corner copying: max. 40 mm
- Smallest workpiece: 150 × 150 mm or 65 × 300 mm
(note: * 65 mm width only with max. element thickness of 25 mm)

Machine technical parameters:
- Electronically controlled feed speed: 6–30 m/min
(note: feed may be limited by individual processing units on the machine)
- Workpiece overhang beyond feed chain:
• 38 mm (including edge thickness 0.3–8 mm)
• 30 mm (including edge thickness 8.1–20 mm)

Power supply:
- Voltage: 400/230 V, +5/–10 % with neutral
- Frequency: 50 Hz
- Control voltage: 230 V AC / 24 V
- Compressed air: 8 bar
- Extraction air speed: 28 m/s

L'annuncio è stato tradotto automaticamente e possono essersi verificati degli errori di traduzione.